@!=1
!===== Parameter File created 10/31/2008=============================
! Parameter files are used with graphic displays to specify the tags a 
! display uses at runtime.  The parameter file is passed to the graphic 
! using the /P option of the Display command.
! Syntax:
!     #replacement=tagname
! Example:
!     #23=A_COLOR
! #23 in any expression in a graphic  would be replaced by the tag A_COLOR.
!============================================================
#1=HMI\Labels\CounterScale10
#2=HMI\Labels\CounterScale11
#3=HMI\Labels\CounterScale12
#4=HMI\Labels\CounterScale13
#5=HMI\Labels\CounterScale14
#6=HMI\Labels\CounterScale15
#7=HMI\Labels\CounterScale16
#8=HMI\Labels\CounterScale17
#9=HMI\Labels\CounterScale18
#10=HMI\Labels\CounterScale19
#11=[Logix]HMI_RecipeOffline.CounterAndScale.MECHCarLugsOp
#12=[Logix]HMI_RecipeOffline.CounterAndScale.MECHCarLugsCen
#13=[Logix]HMI_RecipeOffline.CounterAndScale.MECHCarLugsNonOp
#14=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFlapGOpBot
#15=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFlapGOpTop
#16=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLongBrush
#17=[Logix]HMI_RecipeOffline.CounterAndScale.MECHShortBrush
#18=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLdWhOp
#19=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFdWhOp
#20=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLdFdFlPlOp